• +44 1200 44 77 70
  • glynn@emf-protection.co.uk
  • Live Support Available

UK Made For The USA

Dedicated USA Return Centre

Import Duties Paid!

Fast U.S Shipping

FREE SHIPPING Available

blocgold 6

EMF fabric shielding materials selection

EMF fabric shielding materials selection

As the need for emf protection becomes more well-known emf fabric shielding materials are becoming a better-understood entity.  But unless you spend your life helping people with their emf shielding.  As my wife Esther and I do.  You will likely value a bit of guidance as to which emf shielding fabric is the best for your (unique) emf protection project.  So here we go, these are some of the things you might consider.

EMF Monitor

Firstly, and without exception, you must obtain an emf monitor (and not a cheap one) we recommend the Tenmars TM 195 if you’re on a budget or the Tenmars TM 196 for a more complete emf detector experience.

If you have now obtained a Tenmars emf monitor from us here at wireless-protection.org you will have qualified for a free emf shielding consultation and so you don’t really need to read on.  If you haven’t got there yet.

Some tips!

Here are some tips on how to buy the right emf shielding fabric for your personal emf protection project.

First of all:  Fabrics should only be used for situations in which you cannot use or emf shielding paint (Blocpaint).  Emf protective Blocpaint is the way to go for walls, ceilings and floors.  Why?  Because if you put enough on, it will stop an emf elephant.  And, it’s relatively inexpensive.

If, however, you want to see or breathe through your emf shielding project.  Or if you are living in temporary accommodation the emf shielding fabric is the way to go.

No more tiring emf fabric shielding materials research!

Here at wireless-protection.org, we have done the hard work for you.  After over fifteen years of helping people with their emf protection projects.  We have whittled down the scores of available emf protection fabrics.  Now with us you can choose from just four see through and breathable emf shielding fabrics.

Our “see through pack of four” offer.

Before you go any further though.  I would strongly recommend you purchase from our website one of our “see through pack of four”.  Our “see through pack of four” offer, is an A4 swatch of Swiss Shield New Daylite, Swiss Shield Naturell, Swiss Shield Ultima and our own Blocsilver.

This is a great way to help you decide which fabric to buy and it’s simple.  Just purchase (for a nominal amount) a “see through pack of fours” emf fabric sample sets and an emf meter.  Some emf monitors like the Tenmars TM 196 come with a free “see through pack of four”. Then hold the various (labelled) emf shielding fabric pieces between your emf monitor and the high-frequency emf radiation source. Once you achieve your required reduction in emf readings on your emf meter with the relevant sample.  That’s it your emf shielding material is chosen and you know it works for your specific emf protection project.

The ultimate quick EMF shielding fabric guide!

Below I list a guide as to the features of each fabric but always add in the “pack of four test” to achieve the best results from your investment.

Swiss Shield New Daylite

Swiss Shield New Daylite offers low high-frequency emf protection, high breathability, good light transfer and visibility properties.  It is not conductive and so will not pick up any stray emf’s from electrical wiring etc and therefore doesn’t need earthing. Only consider this fabric for shielding against distant high-frequency emf sources.

Swiss Shield Naturell

Swiss Shield Naturell offers low – medium high-frequency emf protection, medium breathability, reasonable light transfer and visibility properties.  It is not conductive and so will not pick up any stray emf’s from electrical wiring etc and therefore doesn’t need earthing.  Consider this fabric for shielding against medium distant high-frequency emf sources.

Swiss Shield Ultima

Swiss Shield Ultima offers medium high-frequency emf protection, medium breathability, reasonable light transfer and visibility properties.  It is not conductive and so will not pick up any stray emf’s from electrical wiring etc and therefore doesn’t need earthing.  Consider this fabric for shielding against short distant high-frequency emf sources.

Cell Phone Radiation Limited Blocsilver

Blocsilver is our own brand high-frequency emf shielding fabric.  It offers strong high-frequency emf protection, medium breathability, low light transfer and visibility properties.  It is conductive and so will pick up any stray emf’s from electrical wiring etc and therefore does need earthing.  Consider this fabric for shielding against medium distant high-frequency emf sources.  This is also the best fabric for shielding local emf sources such as a neighbours Wi-Fi router or smart meter.

Glynn

As a former telecoms consultant, I know how to make wireless networks work. In 2004, I quickly became aware I needed to learn how to make them stop.
During 2004, my 11-year-old daughter Hannah was affected by cell phone antenna on the roof of her new school building and cell phone tower radiation from a phone mast nearby, so a journey began for me – initially as a campaign for health & safety. Soon though, the reality that the worlds desire for profit and gadgets had already formed a tidal wave that looked unstoppable.
Glynn

Latest posts by Glynn (see all)

Share this post

Share on facebook
Share on google
Share on twitter
Share on linkedin
Share on pinterest
Share on print
Share on email